PDA

View Full Version : 64 C10 SB Rear drop



406Rich
09-13-2012, 01:13 PM
Hi guys, I`ve had the CPP 5-inch drop springs in the rear of my `64 fleet side for quite a while now, I`ve just installed a rear frame tank which now adds another 130 lbs in the rear, now knowing that I was limited on the weight capacity as it was I now want to correct it , looking the RSC603 HD springs 4-inch drop would these allow me carry more weight in the bed as I still use it as a truck...your opinion would be appreciated.

CPPAaron
09-17-2012, 10:10 AM
the 4" HD rear spring would be perfect for towing and higher load capacities.

CHACO
08-29-2013, 11:28 PM
Hey 406rich, Did you end up installing the 4" hd lowering springs? I would like your opinion on the difference in load carrying capacity and ride.

Sumerlove
03-31-2015, 09:57 PM
Thanks for your reply. I have attached 2 photos showing my set up. The way it looks to me, I need to fabricate a new lower shock mount that would move the Base of the shock forward by about 2 inches. Is this common?thanks.


___________________
home (http://www.solitaire-champ.com/play-solitaire.html)