Car and truck discount parts
  • Automotive Hats
  • Brakes

    by Published on 09-18-2011 12:23 PM
    1. Categories:
    2. Product Showcase
    Article Preview

    Hydraulic Brake Assist Systems Kit/Hose Kit with Chrome Master Cylinder Chrome Proportioning Valve and Chromed Aluminum Accumulator Cover Hydraulic Brake Assist Systems Standard Kit with Hose Kit

    This high quality direct bolt-in brake assist system is designed to upgrade your manual or vacuum assisted brakes with a powerful and compact modern hydraulic assist unit. Using all new parts, this unit puts out 1300psi at the wheels.
    ...
    by Published on 08-12-2011 03:56 PM
    Article Preview

    Kugel Komponents now offers new, increased-capacity remote fill reservoirs available in a single, double or triple option. The billet aluminum reservoirs now hold more than double the amount of fluid that the company’s previous reservoirs did, with a capacity of 2.75 ounces. The reservoirs have threaded outlets on both the back and bottom and can be mounted anywhere above the master cylinder, which means that a builder no longer has to remove carpet or get underneath the vehicle to get to the master cylinder, according to the company.
    ...
    by Published on 07-07-2011 03:28 PM
    Article Preview

    To cure the all-too-common problem of “spongy” brakes, noted chassis builder Art Morrison Enterprises has developed a special through-frame fitting that eliminates any fluid air pockets that can occur with other designs. These fittings can be employed by builders of street rods, race cars, custom trucks, and restomod vehicles where aftermarket brake systems are typically used.
    ...
    by Published on 04-09-2011 12:33 PM
    Article Preview


    Wilwood Engineering has introduced new 11- and 12.9-inch Internal Drum E-Brake Rear Kits for 1959-1964 Chevys. The new kits can be used on original classic cars, street rods, classic trucks, street machines and other specialty vehicles that use the classic Chevy differential assembly. They are designed to complement Wilwood’s front brake kits.

    The kits are available in two sizes. Kit No. 140-11827 features Dynapro calipers and 11-inch rotors that will work with most original classic car and period aftermarket 15-inch wheels, as well as some 14-inch wheels that are designed to clear disc brakes.

    The larger size, kit No. 140-11828 features Dynalite calipers and larger 12.9-inch rotors that will work with some 15-inch wheels and all larger aftermarket wheels.
    ...
    by Published on 04-09-2011 12:31 PM
    Article Preview


    Kugel Komponents’ Under-Dash Brake Pedal Assembly is a reverse-mount, 90-degree hanging-style pedal assembly. The assembly is compact and is ideal for applications where the builder does not want the booster or master cylinder out in the engine compartment, said the company. It also eliminates having a unit under the floor, which aids in exhaust and ground clearance issues, according to Kugel.

    The Under-Dash Brake Pedal Assembly is compatible with power or manual brake systems. A small, 180-degree non-power assembly is also offered and both units are available for brake and clutch or brake-only applications. All master cylinders are available as standard fill or remote fill.
    ...
    by Published on 06-02-2010 07:32 AM
    Article Preview


    The new housing is stamped from 1/4-inch thick steel.

    The 9-Inch Factory has released a new Ľ-inch thick housing that offers increased rigidity and is further strengthened with double-width welds. The housing features a 360-degree, ...
    by Published on 06-02-2010 07:28 AM
    Article Preview

    An EPDM seal makes these fittings compatible with brake fluid and nitromethane.

    Jiffy-tite, an innovator of quick-connect self-sealing fluid fittings, has introduced EPDM seals to their range of fittings. EPDM, a type of synthetic rubber, is compatible with brake fluid, making ...
    by Published on 05-31-2010 12:58 PM
    Article Preview


    Classic Performance Products, Inc. now offers new line kits to work with their 1960-70 Chevy Truck power disc brake kits. These brake lines make converting from a drum brake master cylinder to a disc brake master cylinder and prop valve clean and hassle-free. No benders or flaring tools needed. These line kits are available in original material or stainless steel.
    Classic Performance Products, Inc. has been providing the classic Chevy and Ford truck, as well as Chevy passenger car market with top quality steering, brake and suspension components for the last two decades. Call (714) 522-2000 and order a catalog today, featuring our complete line of parts and accessories. Website
    ...

    Page 2 of 3 FirstFirst 123 LastLast