Results 1 to 4 of 4

Thread: Big Brake Kit for 68 Camaro

  1. #1

    Default Big Brake Kit for 68 Camaro

    So I bought the kit and go through everything and I notice that there is no type of direction to tell you how to get the thing installed. I am not looking for exact detail but some type basic information as to what goes where. Does anyone know if there is a basic instruction manual for this install?

    Thanks Steve

  2. #2

    Default

    Good Morning,

    For some reason it wont post link. If you go on www.classicperform.com and to the instructions tab look at 6472WBK-13. Also,if you have any questions please feel free to call!
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  3. #3

    Default

    Just want to say I called Aaron a couple of times with some questions and he answered the phone much to my surprise and was very helpful!

    one thing I did come across is the master cyclinder that came with the kit would not fit on my booster so I just moved everything over to my original as it was new anyway but has me baffled that the mounting bolts were so much closer together. Found a work around and almost done.

  4. #4

    Default

    On the home stretch an trying to get the emergency brake cables that came with he kit installed, one 22.5" one 31". I cannot get the short cable to work on either side....anyone else have a similar experience with a 68 Camaro?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •