Results 1 to 1 of 1

Thread: Having Trouble Running Brake Lines

  1. #1

    Unhappy Having Trouble Running Brake Lines

    So currently I am in the middle of a disc brake conversion on m 1969 Oldsmobile Cutlass. I have hit a roadblock in mounting my proportioning valve and lines, nothing seems like it could go together.

    This is the kit I bought
    https://www.opgi.com/cutlass/M1790DX/
    The kit does not come with a bracket for the prop. valve and doesn't mount directly below the mc like most do

    The company says that the prop. valve is suppose to replace the distribution block and should mount directly onto the frame, however the prop. valve doesn't match up with any of the thread on the frame.

    This is where I am in the project, I need to get the lines on before I can remount the brake & tire
    IMG_1266.jpg

    The new brass proportioning valve on the left with the old distributor block (I think) on the right
    IMG_1270.jpg
    the mounting device on the dist. block is attached via screw so it won't fit on the new prop. valve
    I also fear that maybe what I think is the dist. block is something else, but they both have the brown brake failure wire so it probably is the correct part to replace. Also it seems that to mount over the dist. block the prop. valve would have to be backwards so that the ccp label faced the frame, this is fine but it makes me scared I'm mounting on the wrong side of the car.

    These are my brake lines, the only one that seems like it'll line up is the very short one
    IMG_1271.jpg

    This is where the dist block was mounted
    IMG_1268.jpg
    the location of the actual bolts were those threaded holes to the left of the brake line on the frame. The exhaust manifold blocks the new prop. valve from fitting there
    IMG_1267.jpg

    The kit I received also has some cool mystery parts that aren't mentioned in the instructions:
    I have one the parts on the left pic and about 7 or 8 of the ones on the right. The instructions don't tell where they go and I have no idea what their use in, any explanation would be appreciated
    IMG_1274.jpgIMG_1272.jpg
    Attached Images Attached Images

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •