I have a 1955 f-100 and I would like to use the Toyota Power steering conversion.

Problem is I have the original 223 straight Six so I have power steering pump bracket problems. I have converted to 12 volts so I have a alternator which hangs on the driver side of the engine leaving very little room for the pump.
Where and how do I hang the pump?

Next problem is I have the original 3 speed trans. with the column shift (3 on the tree) which I want to retain. Is there enough room to install the Toyota steering box and attach to the stock steering column and retain the stock 3 speed linkage?

Has anyone done this conversion on a six cylinder, column shift truck?