okay so ive purchased a new 500 series box from cpp along with all new steering parts...they sell complete packages for the steering components.......along with 2inch drop spindles with 13inch big brakes and tubular uppper and lower control arms......heres my problem i still havnt hooked up the power steering pump or even got the engine running but sitting on the hoist with tires off the ground i cannot turn the wheels side to side freely......it almost seems like something iinside the box is jamming up. i can turn the wheels from straight all the way right no problem but from straight to left it jams up.......any one know......could it be i havnt greesed anything yet i figure it shouldnt matter since its still on the hoist and i should be able to turn it side to side with out jamming......i can use some force and get it past the point that it jams its not a ton of force but enuff for me to be concerned about..this was purchased less than 5 months ago to.

thanks
tyler