toyota power steering conversion

[Outlaw56]

There is a lot of information available for the Toyota Power Steering Swap on 56 F-100, but when it comes to the pump and what to use, I have found very little. I tried to find someone who could tell me what replacement pumps would work with this swap and have not got any helpful response. I understand I can go with an eaton or saginaw pump. I also understand one hose is low pressure and the other hose is higher, but not above the 600psi-700psi range.

Is there a specific pump that works well with this swap and if so, exactly what pump am I looking for? At this time, I would like to keep my options open to either an eaton or a saginaw.

[CPPAaron]

Pretty much any saginaw pump can be used... Basically; get what you can fit to your engine combination. In most cases an adj flow valve is required to help with pressures and fell. Here is a link to that:
Classic Car and Truck Brake, Steering and Suspension Parts