My first question is about the C5 Spindle is the ball joint Location raised and by how much?
My next question is about the front upper control arms, Do they add positive caster and how much? Thanks for posting Good Luck
My first question is about the C5 Spindle is the ball joint Location raised and by how much?
My next question is about the front upper control arms, Do they add positive caster and how much? Thanks for posting Good Luck
Our complete set of [url=http://www.braindumps.com/CCNA-Voice.htm]Brain Dumps.com[/url] test questions and [url=http://www.braindumps.com/640-875.htm]640-875 braindumps[/url] study guides you in exact way so you will pass your real [url=http://www.brandeis.edu/]brandeis[/url] exam [url=http://www.usuhs.mil/]www.usuhs.mil[/url] with flying colors of [url=http://en.wikipedia.org/wiki/Maryland_University_of_Integrative_Health]Maryland University of Integrative Health[/url]
The C5 spindle is 1" taller then a standard spindle. This does not require any custom A-arm or any adjustable one like the older B-body conversion other do. The upper a-arms we build allow for more positive caster to be adjusted into the alignment. by adding 5 degrees of caster to newer power steering setups this gives better drivability.
Aaron Strietzel
Email Aaron
Classic Performance Products Inc.
378 E. Orangethorpe Ave
Placentia, CA 92870
Visit Our Site
714/522-2000
714/522-2500 fax
Posting Permissions
Reply With Quote
Bookmarks