mcpv-1 ,No pedal

[CPPAaron]

Well, With a MCPV-1 you need to make sure that you have no more then 1/32-1/16" free play between the master and the pushrod. Also, The MCPV-1 can be a little tough to bench bleed so the use of a plastic syringe is a good thing to help prime the chamber. If you pump the pedal and it does come up it would be air and the bleeding of the master on a bench again would be recommended.

[noahssracer]

Pumping the brakes does absolutely nothing for the pedal.

[CPPAaron]

Ok, then the recommendation of would need to be checked: With a MCPV-1 you need to make sure that you have no more then 1/32-1/16" free play between the master and the pushrod.

[noahssracer]

triple checked push rod clearence...perfect.

[CPPAaron]

You are more then welcome to send this in for a warranty evaluation. Email me at aaron@classicperform.com with your invoice number and I will email you the return number.