Results 1 to 5 of 5

Thread: GM A-body brake problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    The use of an 1-1/8" master will increase volume of the fluid with less pressure. The use of a 1" will have more pressure with less volume.
    If the rear wheel cylinders are too large it will take more pedal pressure to stop.
    You are more then welcome to call us at 800-522-5004 and speak to our tech department as well.
    Aaron Strietzel
    Email Aaron
    Classic Performance Products Inc.
    378 E. Orangethorpe Ave
    Placentia, CA 92870
    Visit Our Site
    714/522-2000
    714/522-2500 fax

  2. #2

    Default

    When pressing the brake pedal, should fluid jump out of the back part of the reservoir like it does in the front?

  3. #3

    Default Problem solved

    After talking with Van on the tech line, I pulled the booster and brought it in to CPP. It was bad. CPP replaced it under warranty. Brakes work great now.

    thnx CPP.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •